HGLRC 20x20 F4 FC, 28a 4 in 1 ESC, 40ch VTX 25-350mw : Our Favorite All in One!
When looking for a new stack for our Gremlin Turbo line we came across the HGLRC brand. We were immediately amazed at what was included with this small stack at a reasonable price. The goal was to get something easy to setup, beginner and expert friendly, and that could handle some abuse. Being able to run from 2 to 4 cell batteries checks off the beginner being able to utilize the power of the 2 cell, the plug in stack takes a lot of soldering out of the equation and 28a esc means you can run some juice through this thing and it will ask for more!
The only thing to remember is the small size, yes you can run this with from 2 to 6 inch props depending on your amp draw/motor kv however the hole mounting is a 20x20mm spacing.
Model: HGLRC XJB F428-TX20.V2
Usage: for 65mm-250mm Frame Kit
Upgrade Micro F4.V2 Flight Control Board ( D-Shot Version)
CPU: STM32F405RGT6, dual 8K.
Black Box: Flash 16M
Input Voltage: 2-4S Lipo
Built-in Betaflight OSD to adjust PID
BEC Output: 5V@3A
Size: 25x25mm board, 20mm mounting holes (M2)
Support Subs/PPM/DSMX receiver
28A 2-4S Blheli_S BB2 4 in 1 ESC:
Input Voltage: 2-4S Lipo battery
Constant Current: 28A
Peak Current: 35A
BEC Ouput: NO
Firmware: BLheli_S 16.5
Size: 27x27mm (main board)
32x32mm ( including pad)
Installing Hole: 20x20mm, M2
CPU: SILABS EFM8BB2 48MHZ
MOS Tube: TOP QUALITY MOSFET
Firmware: Betaflight 16.5
Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and reverse
HGLRC XJB-TX20.V2 Mini FPV Transmitter
Output power: PIT/25mW/100mW/200mW/350mW switchable
Control mode:BFOSD control(RX)/button
BAT: 7-26V,BEC 5V-1A
Video system: NTSC/PAL
Frequency: 5.8GHz 5 bands 40 channels
1x HGLRC F4.V2 AIO OSD BEC Flight Control Board
1x HGLRC 28A Blheli_S 4 In 1 ESC
1x HGLRC XJB-TX20.V2 Mini FPV Transmitter
Be the first to review this product.